How do I program my Ardyino Uno ?

I have four FSR's ( Force Sensitive Resistors ) Connected to A0-A3.

https://www.adafruit.com/products/1075

On top of my Uno I have a 2.8" TFT (https://www.adafruit.com/products/1947)

I want my TFT display to show a certain value I.e OZ, Grams ect.

So any idea how I can program the device to show what I want ? Even displaying that force being applied to the FSR will do, and if it can display the said value in one of four quadrants, displayed on the screen. Thank you in advance.

Adafruit shows how to use the fsr here

They show to use the TFT screen here.

Do you have the FSR working?

Do you have the TFT working?

What have you done so far to combine the two?

Everything works and powers on. I am not savy with programming, so I don't know what to get out of the tutorials

I don't know what to get out of the tutorials

What you're saying is that you haven't made enough investment in yourself yet. This is one of those give-a-fish-teach-how-to-fish moments. You're not going to learn anything if you don't invest some of your time reading up on programming. There are a bazillion free tutorials out there and as many book. Spend some time with some of those and try experimenting with some of the sample programs.

econjack:
There are a bazillion free tutorials out there

… including this one here on this very site, which is also included in the IDE: File > Examples.

edit…

SPACEW01F:
Everything works and powers on

Does that mean you get fsr readings in the serial monitor?

SPACEW01F: Everything works and powers on. I am not savy with programming, so I don't know what to get out of the tutorials

Try at least some of the tutorials in sections 1, 2, 3 and 5. Skip section 4, you'd have to unlearn using C++ Strings and then learn to use C string arrays. Section 5 will get you into arrays and loops.

You need to learn to stand up and walk before trying to fly.