How do I remove all delays from my code?

[StefanL38]

non-blocking timing becomes much easier to understand if the principle is explained with

1. an everyday example

2. carefully named variable-names

So here is another approach to explain how non-blocking timing based on function millis() works

Example-code for timing based on millis() easier to understand through the use of example-numbers / avoiding delay()

non-blocking timing. Execute code only from time to time. There are a lot of different ways to learn programming. This thread wants to add another approach that is different to the yet existing ones. UPDATE 06.01.2023 if you are mainly interested in applying non-blocking timing you can do a quick read of this short tutorial / demonstration If you are intersted in understanding the details how it works go on reading here. I use an everyday analogon in this post to explain the basic principle …

and here is a demcode showing how state-machines are working

A Demo-Code explaining the switch-case state-machine and how to do things (almost) in parallel

Hi everybody, if you look at the end of this first posting you see a list of links that show where this tutorial was used as a link. Go through this list to find additional information on how to apply this code This democode requires only the pure microcontroller without any hardware. You just open the serial monitor to watch the behaviour of the code. From time to time I enjoy writing demo-codes that want to explain programming-functionalities. There are a lot of different approachs to expl…

best regards Stefan