# How many device can i connect when using OneWire?

**URL:** <https://forum.arduino.cc/t/how-many-device-can-i-connect-when-using-onewire/1179983>\
**Category:** Project Hub\
**Created:** [October 19, 2023, 8:57am UTC](https://forum.arduino.cc/t/how-many-device-can-i-connect-when-using-onewire/1179983 "2023-10-19T08:57:18Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.arduino.cc/u/awneil)\
**Post date:** [October 19, 2023, 10:23am UTC](https://forum.arduino.cc/t/how-many-device-can-i-connect-when-using-onewire/1179983/4 "2023-10-19T10:23:15Z")

</div>

You need to study the Analog Devices\* 1-WireTM **documentation**.

1-WireTM can support very large numbers of devices - but it requires more careful driver design than the single microcontroller port pin commonly found in Arduino projects.

There's been a number of discussions on this recently; eg,

> [@Reading multiple DS18B20 sensors](https://forum.arduino.cc/t/reading-multiple-ds18b20-sensors/1166149/4):
>
> The simple drive with just a passive pull-up is fine in simple cases - but maybe not so much when you come to large networks of many sensors. Take a look at this:

* * *

**\*** Analog Devices acquired Maxim, who acquired Dallas Semiconductor - the originators of 1-WireTM

---

_[View the full topic](https://forum.arduino.cc/t/how-many-device-can-i-connect-when-using-onewire/1179983)._
