# How to connect 10 toggle switches to an arduino board?

**URL:** <https://forum.arduino.cc/t/how-to-connect-10-toggle-switches-to-an-arduino-board/1240636>\
**Category:** General Electronics\
**Created:** [March 27, 2024, 2:36pm UTC](https://forum.arduino.cc/t/how-to-connect-10-toggle-switches-to-an-arduino-board/1240636 "2024-03-27T14:36:07Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![LarryD](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/larryd/32/215550_2.png) [@LarryD](https://forum.arduino.cc/u/LarryD)\
**Post date:** [March 27, 2024, 3:54pm UTC](https://forum.arduino.cc/t/how-to-connect-10-toggle-switches-to-an-arduino-board/1240636/9 "2024-03-27T15:54:19Z")

</div>

- Yes I drew it up.  
It can be found here:

> [@Share tips you have come across](https://forum.arduino.cc/t/share-tips-you-have-come-across/428745/999):
>
> Different circuit schematics to refer to: DIY basic Logic Probe and Logic Plulser. @ 5V, Logic Probe's load is ~1.6mA. let’s say we have circuit S1. Let’s say the switch is 10 feet from the Arduino. This means we are taking the +5v supply line out 10 feet and 10 feet back. 5v is now extended 20 feet with the potential of it coming in contact with things that can go pop if there was ever a short circuit on the cable. Also, sending 5v out on…

- It’s just a summary I put together.

---

_[View the full topic](https://forum.arduino.cc/t/how-to-connect-10-toggle-switches-to-an-arduino-board/1240636)._