How to Control 8x8 Led Matrix using 4017 decade counter?

How to Control 8x8 Led Matrix using 4017 decade counter, 8 Digital Arduino outputs, and 8 resistors.
Hello, I currently have a circuit wired up on a breadboard, I scavenged the internet to such topic and all the examples I've seen you Max chips/micro controllers, and all the code out there does not correspond to the hardware I'm using. Any input would be much appreciated!

A very quick Google search turned up this tutorial:

Unless you have a very special 4017 that can sink the current of eight LEDs on each pin you will need the transistor drivers shown in the schematic. If you want 8x8 instead of 8x10 just leave out the last two rows.