HOW TO INTEGRATE AN ATMEGA328-PU ON ARDUINO UNO

FRIENDS I HAVE PURCHASED NEW ARDUINO UNO BOARD ATMEGA328P-PU CHIP INSTALLED.

I REPLACED IT WITH ATMEGA328-PU AND RECEIVED THIS MESSAGE:-

Arduino: 1.8.1 (Windows 10), Board: "Arduino/Genuino Uno"

Build options changed, rebuilding all Sketch uses 862 bytes (2%) of program storage space. Maximum is 32256 bytes. Global variables use 15 bytes (0%) of dynamic memory, leaving 2033 bytes for local variables. Maximum is 2048 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xd6 Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xd6 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xd6

This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.

HOW SHOULD I PROCEED??

(deleted)

Add this to your IDE https://github.com/MCUdude/MiniCore so you have support for the Atmega328 (vs Atmega328P that your Arduino came with - different signature bytes). Then get a Programmer such as https://www.sparkfun.com/products/9825 and bootload the new parts.