How to replace Byte in serial command

Hi,

I have this code line in one of the example codes for the GPRS shield.

GPRS_Serial.print(0x1A,BYTE);

[\code]

This byte word is no longer supported by Arduino 1.0. Can I use just the below mentioned code for the same functionality. 

[code]

GPRS_Serial.print(0x1A);

[\code]

[/code]

What is the output supposed to look like?

You can caste the value to anything you like (within reason) with:

Serial.print((byte)0x1A);

(by the way, the terminating tags use / not )

Sending a raw byte is done with
GPRS_Serial.write(0x1A);