Hi, I am do my programming with VSCode and PlatformIO which works fine. But now I like to set the Bod fuse which is actually not support by PlatformIO. So how can I change it at best without loading the boodloader? Is there anything I can do with avrdude? I am new to the hardware near programming. …

You'd need a device programmer that supports the ATmega4809 (perhaps another Arduino running jtag2updi, but preferably something like a PICKit4 or SNAP programmer.) I believe that you can modify the BOD behavior from within your sketch. It's only the initial values that are loaded from the fuse. (O…

For 2 Arduinos I prefer the cheap solution. :slight_smile: I found some guide to program a Nano but not explicit a Every. Is this the same? Also a could not find anything to change the behaviour of Bid in the sketch. Perhaps you can help me with a buzzword I have to look for. Cheers Nils

Oh wait - I keep forgetting that the Every doesn't use a bootloader, and has it's own internal programmer. Try something like: /Applications/Arduino-1.8.9 copy.app/Contents/Java/portable/packages/arduino/tools/avrdude/6.3.0-arduino17/bin/avrdude -C/Applications/Arduino-1.8.9 copy.app/Contents/Jav…

MegaCoreX is better for me actually. :slight_smile: I will go through it but is it fine to set the fuses once and then work again with Platform IO as I like VSCode for development?

That'll depend on whether platformIO sets any of the fuses each time you upload. The Arduino IDE sets SOME fuses (every time. But not the BoD fuse.) I think MegaCoreX sets all of the fuses (unless you've set it to use a bootloader.) I don't know what platformIO does.

How to set Bod fuse

Official Hardware Nano Family Nano Every

hansibull January 12, 2020, 11:15am 5

You can also install MegaCoreX if you want to have the BOD settings in the tools menu (along with lots of other options too).

Topic		Replies	Views
How to set FUSES Nano Every	53	761	May 1, 2026
Can the Adafruit UPDI Friend be used to program the Arduino Nano Every? Nano Every	3	132	July 11, 2026
Atmega4809 Fuse settings via arduino (boards.txt?) Nano Every	18	3123	September 8, 2021
Changing fuses in IDE v2 Uploading	4	241	December 17, 2024
How can I activate the lock bits of nano every module with avrdudes Nano Every	1	438	June 20, 2023

How to set Bod fuse

Related topics