Below are both my transmitter and Receiver schematics. The transmitter schematic includes a MIC4429 which has the same package as the TC4429, so it will be interchangeable on the PCB with the MIC4429 if i don't use the MIC4429. I used a B82133 since it has an inductance of between 1 and 420 uH.
I will be broadcasting at 200 baud and so should be able to us the FT232. I hope this is a low enough baud to prevent multipath interference. I figure that it would be best to adjust R13 via trial and error.
Let me know if you see anything that could use adjusting. Thanks!
