I am not sure if I am getting things right

Using Arduino Networking, Protocols, and Devices
#1

I am developing two Arduino applications using two nRF24L01+ wifi adaptors connected to a socket adaptor board to give more current for 3.3v. I am attaching two images of the wires out of the adaptor board into the Nano.

Would anyone be kind enough to tell me if I have got anything wrong. The wire colour coding is visible between the nRF24L01+ adaptor board and the Nano.

I am also looking for descriptions for the functions and fields in the RF24 library, like I don’t know what functions are supported, what parameters they take. I know not where to find them.

Andrew

arduino-nano.jpg
arduino-nano.jpg1844×1037 655 KB

nRF24L01-p.jpg
nRF24L01-p.jpg1844×1037 569 KB

#2

You should solder the pins of the Nano.

muscipula:
I am also looking for descriptions for the functions and fields in the RF24 library, like I don't know what functions are supported, what parameters they take. I know not where to find them.

http://tmrh20.github.io/RF24/classRF24.html

#3

Images from Original Post so we don’t have to download them. See this Image Guide

92619d150f14ae32352be515ed209419a8118333.jpg

53267bf46b095d9f94401dfeaf81cc310512c62a.jpg

It would also help if you reduce the size of images - 640x480 is usually sufficient.

…R

#4

This Simple nRF24L01+ Tutorial may be helpful.

...R

#5