I am trying to interface LM35 temperature sensor and soil moisture sensor

[scott52]

I am trying to interface LM35 temperature sensor and soil moisture sensor. The problem is I haveh attached my program and the screenshot of my serial monitor Please Use 1.1 volt Aref, pre-read and smoothing.

[pylon]

I cannot see anything attached.

BTW, a screenshot of the serial monitor is bad idea, that's text, so just copy/paste it to your post, it's easier readable for all of us!

[MarkT]

And we need to see the circuit you are using too.

Please never post text as an image - completely useless for recreating your problem, for searching, and inaccessible. copy and paste the text. You can use code tags to get fixed-width font if you want.

[TomGeorge]

Hi, @scott52
Welcome to the forum.

Please read the post at the start of any forum , entitled "How to use this Forum".

How to get the best out of this forum

Hello, Welcome to the Arduino Forum. This guide explains how to get the best out of this forum. Please read and follow the instructions below. Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is frustrating for you and frustrating for us. The people who try to help with your pro…

A copy of your code and a circuit diagram would be very helpful.

Tom...