I am using HC-06 and now my code wont upload to arduino

[serafinlubo]

Hi there i am making programming project with arduino. Its "gate" controlled with HC-06 module and RFI module. But i think I forgot to unplug serial ports RX/TX from HC-06 and now my code wont upload anymore even with RX/TX unplugged. This is the error message:

Sketch uses 5468 bytes (16%) of program storage space. Maximum is 32256 bytes.
Global variables use 519 bytes (25%) of dynamic memory, leaving 1529 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x31
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x31
Failed uploading: uploading error: exit status 1

[sterretje]

Disconnect everything from the board and try. Which board, by the way? What else is connected?

[realhansgruber]

Always kind of strange when people asking for help won't reply.