# I can't burn bootloader

**URL:** <https://forum.arduino.cc/t/i-cant-burn-bootloader/855000>\
**Category:** Uploading\
**Created:** [April 28, 2021, 9:12pm UTC](https://forum.arduino.cc/t/i-cant-burn-bootloader/855000 "2021-04-28T21:12:02Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![streamfisher](https://avatars.discourse-cdn.com/v4/letter/s/c5a1d2/32.png) [@streamfisher](https://forum.arduino.cc/u/streamfisher)\
**Post date:** [April 29, 2021, 9:13am UTC](https://forum.arduino.cc/t/i-cant-burn-bootloader/855000/4 "2021-04-29T09:13:06Z")

</div>

I say I think it is the bootloader because of the troubleshooting steps I followed. Somewhere I read that if a loopback test is successful then it was probably a problem with the bootloader. And the loopback test works fine.

> [@Loop-Back Test Instructions](https://forum.arduino.cc/t/loop-back-test-instructions/73046):
>
> The loop-back test is a troubleshooting procedure to determine if serial communication between the PC and Arduino board is working in a typical Arduino installation. The test proves that the host computer, hardware driver, USB cable, and USB to serial converter are all working. Loop-Back Test Instructions... Disconnect power from the board Remove all connections and shields from the board Force the processor to remain in reset by connecting a jumper from RESET to GND Connect a jumpe…

Here is the schematic that I followed for reburning the bootloader.

[https://images.app.goo.gl/DY6rzCd2LXjTeTL66](https://images.app.goo.gl/DY6rzCd2LXjTeTL66)

---

_[View the full topic](https://forum.arduino.cc/t/i-cant-burn-bootloader/855000)._
