I have problem with my code, please help me

Projects Programming
1 
#include <DHT.h>
#include <DHT_U.h>

// Senzor teploty a vlhkosti vzduchu DHT11
// Na displeji I2C LCD1602 uvidíš vlhkost a teplotu vzduchu.
/*/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/*/
#include <dht.h>
#include <LiquidCrystal_I2C.h>
#include <Wire.h>
LiquidCrystal_I2C lcd(0x27,16,2);
DHT; //vytvořit objekt třídy dht
const int DHT11_PIN= 4;
void setup() {
Serial.begin(9600); // spustit sériový monitor na 9600 bps
lcd.init(); // inicializace lcd
lcd.backlight(); // zapnout podsvícení
}
void loop() {
  lcd.setCursor(0, 0);
// přečíst hodnoty vrácené z čidla
int chk = DHT.read11(DHT11_PIN);
switch (chk) {
case DHTLIB_OK:
lcd.print("DHT11: OK!");
break;
case DHTLIB_ERROR_CHECKSUM:
lcd.print("Checksum chyba");
break;
case DHTLIB_ERROR_TIMEOUT:
lcd.print("Time out chyba");
break;
default:
lcd.print("Neznama chyba");
break;
}
delay(500);
// zobrazit data
lcd.clear();
lcd.setCursor(0, 0);
lcd.print("Teplota:");
lcd.print(DHT.temperature,1); // zobrazit teplotu na displeji
lcd.print(char(223)); // zobrazit znak "°"
lcd.print("C");
lcd.setCursor(0, 1);
lcd.print("Vlhkost:");
lcd.print(DHT.humidity,1); //zobrazit vlhkost na displeji
lcd.print(" %");
delay(300); // počkat 300 ms
2

Welcome to the forum

What is the problem ?

3

Your code is missing at least one of these '}'

4

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.