Hi..!! I am sending data(CSP header) as 0x50,0x46,0x00,0x00 to Gomspace Camera Nanocam C1 U(I2C address is 0x06) and I am expecting 50 bytes of data, but I am getting 0xFFFFFFFF. Is it happening due to frequency synchronization or any other hardware problem. #include <Wire.h> void setup() {Wire.b…

I2C communication on Gomspace NanoCam C1U with Arduino Board

NomanSubhani January 30, 2020, 10:23am 6

I am getting the same problem.

Please guide me if you had any success