Windows 10 (2 computers), Windows 11 (1 computer). 1.8.16 and 2.3.2 on each computer.
I have three computers with 2.3.2 and 1.8.16. All three can connect to ESP32S3 dev module boards for OTA using 1.8.16 with no trouble. One of the computers (win10) works fine with 2.3.2 (and 1.8.16) with OTA. The other two computers (one win10, one win11) works perfectly with 1.8.16 but will not connect for OTA with 2.3.2. The board appears on the PORT list and can be selected, but when I attempt to update the board by OTA it tries but fails "with ESP did not respond".
Everything works perfectly using USB connection the the boards.
I have tried several ESP32S3 boards with no change.
Since 1.8.16 works perfectly on all three computers I don't think it is firewall or the like (I have also tested with the firewall OFF). I have looked at everything that I can think of on the three computer and they are all configured exactly the same.
I have run out of things to check or change!!