Ok guys maybe you can help me out. I bought a FTDI Basic Breakout 3.3/5V (Arduino Compatible) from DFRobot. I'm using my Duemilanove chip in a breadboard with the correct crystal and caps and the resistor on the reset pin going to 5v. I used the tutorial at http://itp.nyu.edu/physcomp/Tutorials/Ard…

I'm dying huuur avrdude: stk500_getsync(): not in sync: resp=0x00

Topic		Replies	Views
Perfboard/Breadboard Arduino Upload Errors (FTDI Breakout) 3rd Party Boards	3	1480	May 6, 2021
avrdude: stk500_getsync(): not in sync: resp=0x00 Programming	2	1513	May 5, 2021
Arduino Troubleshooting for avrdude: stk500_get sync():not in sync,resp=0.00 IDE 1.x	10	1999	May 5, 2021
Sync Error On Sketch Upload IDE 1.x	3	831	May 5, 2021
avrdude: stk500_getsync(): not in sync: resp=0x00 IDE 1.x	15	9238	May 5, 2021