I'm attempting to interface my Arduino with Flash, but I'm running into some problems. I run Serproxy, but when I try to run the flash file the Dos window for Serproxy outputs..
Server thread launched server(4) - thread started Failed to open comm port - connection refused
I'm not sure what the problem is. In the arduino IDE I use com4 to program so I figure that its the same. Below is the also the config file for Serproxy..
Hope I can get some help on this, Thanks
# Config file for serproxy # See serproxy's README file for documentation # Transform newlines coming from the serial port into nils # true (e.g. if using Flash) or false newlines_to_nils=true # Comm ports used comm_ports=1,2,3,4,5,6 # Default settings comm_baud4=57600 comm_databits4=8 comm_stopbits4=1 comm_parity4=none # Idle time out in seconds timeout=300 # Port 1 settings (ttyS0) net_port1=5331 # Port 2 settings (ttyS1) net_port2=5332 # Port 3 settings (ttyS2) net_port3=5333 # Port 4 settings (ttyS3) net_port4=5334 # Port 5 settings (ttyS4) net_port5=5335 # Port 6 settings (ttyS5) net_port6=5336