It's 8Mhz. Yeah, I keep checking the settings in the boards menu as well to be sure. Since I burned the the Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168 firmware, I keep choosing that one.
The output is this:
hardware/tools/avrdude -C/home/lab/Greg/arduino/hardware/tools/avrdude.conf -v -v -v -v -patmega168 -carduino -P/dev/ttyUSB0 -b19200 -D -Uflash:w:/tmp/build7496679973925227559.tmp/Blink.cpp:i
avrdude: Version 5.11, compiled on Sep 9 2011 at 16:00:41
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/home/lab/Greg/arduino/hardware/tools/avrdude.conf"
User configuration file is "/home/lab/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyUSB0
Using Programmer : arduino
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude done. Thank you.