Hi everibody!
I wannt to make this with 2x MPU-6050(accelerometer), some MP3 shield and arduino nano.
I need help for this, schematic and some code. I am very beginner with arduino. I searched but not find specific things.
Like this: Iron Man Walking sound effects test 1 - YouTube
Please help!
Sorry for my bad Enghish! 
Peter
Explain a little bit more, please, then may be I could help. If you want help on the accelerometer I suggest this link: Accelerometer tutorial. What MP3 shield? Also, I should mention that this project of yours is going to take some patience, so, please bare with me. I am intermediate at Arduino, which basically means I am good at programming with Arduino. Not to brag or anything. Just to let you know that you are not dealing with a beginner. I want to mention that you are going to have to do the research too, so it's not just me helping you. However, I will try to help you as best as possible with your project with yours and my knowledge. Remember that patience is key in this project, so that means you are going to go through some trouble (if any) & have to bare with me & yourself. I will guide you step by step as best as possible. Try to look up tutorials that lead up to your project, that's what I do. I see a couple good tutorials for "iron man arduino": https://www.instructables.com/id/Animatronic-Iron-Man-Mk-III-suit/
I see specs but i search schematic and some code for this. I dont know make it alone. 
This i wannt use:
MP3 Shield
This tutorial use other sensors... i wannt accmeter verdion 
First, why are you using a shield? Second, why this shield? Third, do you need help making the actual project, like an iron man mask? Last, what was the other sensor, I thought it was MPU-6050. I can help with the schematic after we figure out what you are actually doing. Like I said, this is going to require patience. Let's just get through designing your actual iron man thing first, then wiring. The code was on the website, so is the wiring. Code Like I said, "let's take this one step at a time." Meaning - let's go through this together & take certain projects like what DroneBot Workshop was doing & put that into practice.
I am patient. I'm happy to your help.
Step 1. Here is my helmet tutorial:
Step 2. I need to do Iron man walk sound. No matter what kind of parts. The point is to work. What's your advice?
Step 3. Make ARC Reactor with arduino nano and 24led WS2812B circle.
This is my plan.
Did you build the helmet yet? Because if you did you would have part of your schematic, so that's your first problem. Could you also try to use a lock with a spring to hold the helmet's faceplate into a certain position? For instance, you have a long small spring that attaches to the faceplate, then when the lock lets go, it will spring the faceplate open. Almost like a a spring lock suit compresses the suit down to where you could fit in it. Just an idea, not sure if that would work.
I haven't built the mechanism yet. I wait for the parts. Based on the tutorial, it will work. If it is ready and if it is needed I will make a spring lock on it.
Do you actually have the helmet is what I am trying to ask.
You are aware that the "MP3 shield" is not actually a shield, right? Why not use the DF player mini? DF player mini That has a lot less wiring, and is more cost efficient. Are you trying to go for a shield approach? If so, why? Shields can get in the way of wiring. If you want no wires, why not use EasyEda? EasyEda is a PCB software ONLINE that you can make your own PCB at. I mean, I know that you can't make your schematic yet, but, you know, afterward you could make your own PCB. There are also tutorials on the DF player mini. I recommend: MP3 tutorial 1,MP3 tutorial 2, &MP3 tutorial 3
OK i will use DFPlayer Mini! Is smaller and cheaper!
For sensor MPU-6050 is be good?
Yes! But, could you use the tutorial up above, please? Because I think that the tutorial I listed above
in #3 (on the far right side of the box) for the accelerometer would really be useful.
No, this one: Accelerometer tutorial.
So... This schematic with written code...
Without display and leds... And where connect the mp3 player?
Yes, now you are understanding! I can add the MP3 player & make a schematic with it whenever I get the chance. We can also modify the code to your understanding, I should tell you that I have school to deal with, so keep that in mind that I will only be online during certain times.
Yes, I understand. Now at least I know what to order. THX for your help. You have time to make it. 3 weeks while comming parts from Ali.I am patient!!!
No problem.
Why are you using 2 accelerometers? Do you need any buttons for the helmet or anything else? I am asking because I am trying to make the schematic for the components.
2 accelerometers for two legs. Yes i need switch.
