If being lazy was my problem I don't think I would be taking the time to post on the Arduino forms about project structure. A project with hardware reaching up above 500 bucks and over a years worth of effort. I mean I'm pretty sure the Arduino site wouldn't even be in the top 25 percent most popular sites on the internet. This is a very specific location an I'm talking as far as I can tell on point with the topic. The Project guidance, sounds like a very general topic. I'm sorry I don't even know the specific questions I need to be asking right now since I have not been formally trained as an engineer. I have a lot of questions to ask I think I have been asking them pretty straight forwardly an can not become more specific until the general questions have been answered.
Not that the answers normally get specific or even get past... I need a schematic.. I need program....
By lazy people might I add who would rather be asked what 1+1 is an expect the person asking to have not already figured out the answer before they asked it. I think Leo helped out a lot by stating that if you where actually interested in helping all the additional information asked for had already been provided. Leo provided a link to find it all.
I am not asking anyone to do something they do not want to do. I assumed the people on this forum might be interested in looking at questions. I thought I might be able to have a nice conversation with like minded folks. Do my part in adding to the growing information about Arduino on the internet. I learned quite a bit in my last post... like I needed to learn accelstepper even though the post was steppers verses servos. So, wvmarle thank you for the comment, under consideration... Further help from yourself, unnecessary. No need for you to waste your time any further.
Lastchancename
Thank you for your response also. Yup I'm upgrading from a open to a close. I didn't realize there were so many wires coming off the closed loop. From my understanding I can tell it where home is like a one time deal an then always refer... Man that does bring an issue up. I assume the closed loop I am buying has a an identifying index point. I will have to remember to mount the plate in the corrected orientation on the shaft to be able to set the index as home every time. The bigger problem is still, I have too many input an outputs to be able to use a 8 pair Ethernet cable.
And, this is where the
wvmarle:
If you want help you shouldn't be so lazy as to expect people in looking up stuff for you, but just explain your problem clearly.
Just burns my @#$%^ I am obviously asking for a hint or trick that most would have learned from experience on how to reduce the number of wires needed when going from a controller to a device. Wisdom is what I seek.
Anyways, bump.