Is it possible to send full $GPGGA line via GSM?

Is it possible to send full $GPGGA line via GSM? :|

Yes, a full $GPGGA string is about 75 characters so you can use SMS, Email, FTP or what ever else you like.

Can you tell me a little bit more about what you are trying to do?

i want to send only the line of $GPGGA using GSM every 5 seconds… … is it easy? :stuck_out_tongue:

i’m using arduino board with 2 hardware uart

is it easy?

Sure. Your first project should have been about reading data from the GPS. That would have rated about a 3 on a scale of 0 to 10.

Your second project should have been about sending text messages and receiving responses. That would have rated about a 7 on a scale of 0 to 10.

This project is about combining those two projects. It rates a 0 on the 0 to 10 scale.

I would start by reviewing some of the code examples and libraries that you can find here.

Here is a GPS library. It takes most of the data from the $GPRMC string but it should have what you need. You could modify this code to use $GPGGA. http://playground.arduino.cc/Tutorials/GPS

Or you could use a GPS library and this one works very well. http://arduiniana.org/libraries/tinygps/

For transmitting over GSM here is a library you can try. I have never used this one but it is a place to start. http://labs.arduino.cc/GPRS/Library