Hi,
I bought a 32 channel servo controller and I just want you guys to please confirm my schematic before hooking it all up.
I'll probably will be using at least 16 servos for my project, according to the manufacturer, pins 31 & 32 are the power source for the chip.
You will need a HEFTY well regulated 5-6V power supply, capable of supplying at least 1 ampere per straining servo, for ALL servos that will be moving simultaneously. Do not even think of using AA batteries.
Thank you so much for the reply, but other than that, the wirings are correct (especially the wirings between the grnd of arduino and the ground of the external power source for the servos).
Cheers!
You haven't told us which servo controller that is. An important piece of information.
You incorrectly have 5V wired to the barrel socket of the Arduino - that takes 7 to 12V.
I don't understand why you have connected the 5V to the servo controller, but then again I don't know what it is so that might or might not be right.
