issues with uploading sketch

Development Tools IDE 1.x
1

Arduino: 1.8.5 (Windows 10), Board: "Arduino Nano, ATmega328P"

In file included from C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino:11:0:

C:\Program Files (x86)\Arduino\libraries\Keyboard\src/Keyboard.h:29:2: warning: #warning "Using legacy HID core (non pluggable)" [-Wcpp]

#warning "Using legacy HID core (non pluggable)"

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void setup()':

Centipede_for_v58_and_up:70: error: 'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?
Keyboard.begin(); // Start they keyboard emulator

^

Centipede_for_v58_and_up:76: error: 'TXLED1' was not declared in this scope

TXLED1;

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void loop()':

Centipede_for_v58_and_up:87: error: 'TXLED1' was not declared in this scope

TXLED1; // Toggle the TX on-board LED

^

Centipede_for_v58_and_up:92: error: 'TXLED0' was not declared in this scope

TXLED0;

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void bootLoop()':

Centipede_for_v58_and_up:104: error: 'TXLED0' was not declared in this scope

TXLED0; //TX LED is not tied to a normally controlled pin

^

Centipede_for_v58_and_up:106: error: 'TXLED1' was not declared in this scope

TXLED1;

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void repeatKey(byte, int)':

Centipede_for_v58_and_up:123: error: 'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?
Keyboard.write(key);

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void enterCredentials()':

Centipede_for_v58_and_up:148: error: 'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?
Keyboard.print(username);

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void enterEnrollment()':

Centipede_for_v58_and_up:159: error: 'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?
Keyboard.press(KEY_LEFT_CTRL);

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void wifiConfig()':

Centipede_for_v58_and_up:169: error: 'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?
Keyboard.press(KEY_LEFT_SHIFT);

^

C:\Users\shelby\Downloads\Centipede_for_v58_and_up\Centipede_for_v58_and_up\Centipede_for_v58_and_up.ino: In function 'void setupAdvancedNetworkConfig()':

Centipede_for_v58_and_up:241: error: 'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?
Keyboard.write(KEY_ENTER);

^

exit status 1
'Keyboard' not found. Does your sketch include the line '#include <Keyboard.h>'?

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

2

The Keyboard library is not compatible with the Nano. It can only be used with boards that have native USB, such as Leonardo, Pro Micro, Micro, Zero, etc.

3

Thanks I got them on amazon. I will make sure to look at more compatible board for this code going forward.

4

My personal preference is the Pro Micro.

The Arduino Micro is also pretty nice and similar to your Nano.

The Leonardo I would only recommend if you want to use it with Arduino shields. Otherwise it's just unnecessarily big and hard to use with a breadboard.

I don't have any experience with the Zero range of boards (SAMD). The MKR Zero looks OK.