ITDB02

Other Hardware Displays
1

Hope somebody can help

I just bought :
ITDB02 Arduino shield V2.0 from ITEAD
ITDB02-2.4E TFT LCD module with touch
Arduino MEGA 2560
I am trying to turn the display, use

#include <UTFT.h>
#include <UTouch.h>

extern uint8_t BigFont[];
extern uint8_t SevenSegNumFont[];

UTFT myGLCD(ITDB24E_8,19,18,17,16);
UTouch myTouch(15,8,14,9,20);

int x,y;
void setup()
{
myGLCD.InitLCD(PORTRAIT);
myGLCD.clrScr();
myGLCD.setFont(BigFont);
myGLCD.setBackColor(VGA_BLACK);
myGLCD.setColor(VGA_WHITE);
myGLCD.print("OZ8CW",CENTER,100);
myGLCD.print("Super Keyer",CENTER,130);
delay(1000);
myGLCD.clrScr();
myTouch.InitTouch(PORTRAIT);
myTouch.setPrecision(PREC_LOW);

}

void message(int tal){
myGLCD.setFont(SevenSegNumFont);
myGLCD.printNumI(tal,CENTER,270);
myGLCD.setFont(BigFont);
}

void knap1(){
myGLCD.setColor(VGA_WHITE);
myGLCD.drawRoundRect(5,5,235,59);
myGLCD.print("Knap 1",80,25);
while (myTouch.dataAvailable() == true)
{
myTouch.read();
x=myTouch.getX();
y=myTouch.getY();
if(x>5 && x<235 && y>5 && y<59)
{
myGLCD.clrScr();
delay(100);
message(1);
knap2();
}
}
}
void knap2(){
myGLCD.setColor(VGA_WHITE);
myGLCD.drawRoundRect(5,69,235,123);
myGLCD.print("Knap 2",CENTER,87);
while (myTouch.dataAvailable() == true)
{
myTouch.read();
x=myTouch.getX();
y=myTouch.getY();
if(x>5 && x<235 && y>69 && y<123)
{
myGLCD.clrScr();
delay(100);
message(2);
knap3();
}
}
}
void knap3(){
myGLCD.setColor(VGA_WHITE);
myGLCD.drawRoundRect(5,133,235,187);
myGLCD.print("Knap 3",CENTER,150);
while (myTouch.dataAvailable() == true)
{
myTouch.read();
x=myTouch.getX();
y=myTouch.getY();
if(x>5 && x<235 && y>133 && y<187)
{
myGLCD.clrScr();
delay(100);
message(3);
knap4();
}
}
}
void knap4(){
myGLCD.setColor(VGA_WHITE);
myGLCD.drawRoundRect(5,197,235,251);
myGLCD.print("Knap 4",CENTER,215);
while (myTouch.dataAvailable() == true)
{
myTouch.read();
x=myTouch.getX();
y=myTouch.getY();
if(x>5 && x<235 && y>197 && y<251)
{
myGLCD.clrScr();
delay(100);
message(4);
knap1();
}
}
}

void loop(){
knap1();
}

but, I am see a white screen. What wrong with me?! What i am doing wrong?!

2

I don't think there's anything wrong with you. I have the 2.8 version and it works great on an UNO but I've yet to get it to display on the MEGA 2560. I know the touch is working. Since we can't use the serial monitor with these due to the pins being in use, I hooked up an LED and added code to turn off the LED if the screen is touched. The LED turns off when I touch the screen so that part is working.

When I first started with this display on the UNO I couldn't get it to work either. Turns out since I was trying to use the Serial Monitor to tell me what was going on, the display wasn't going to work. As soon as I got rid of the Serial lines in my code, it worked.

There are no Serial lines in the code I'm trying with the MEGA, so I'm not sure what it is.