I've a proplem !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

How it's right ? ??? ??? ??? ??? ???

#include <Wire.h>
#include<LiquidCrystal.h>
#define sensorPin 0
#define DELAY1 10
#define DELAY2 500
#define hysterse 0.5
const int cycles = 20;

void setup(){
LiquidCrystal.int();
LiquidCrystal.backlight();
}

void loop() {
float resultTemp = 0.0;
for(int i = 0; i < cycles; i++){
float temperature 0 = (5.0 * 100.0 * analogVaule) / 1024;
resultTemp += temperature;
delay(DELAY1);
}
resultTemp /= cycles;
lcd.clear();
lcd.setCursor(3, 0);
lcd.print("Temparatur:");
lcd.setCursor(5, 1);
lcd.print(resultTemp);
#if ARDUINO < 100
lcd.print(oxDo + 15, BYTE);
#else
lcd.write(oxDo + 15);
#endif
lcd.print("C");
delay(5000);
lcd.clear();
lcd.setCursor(6, 0);
lcd.print("KURT");
delay(5000);
}

Great thread title.
Not.

 lcd.write(oxDo + 15);

Zero is not the same as the letter 'o' ( the one that comes after the letter 'n')

#7 below:

http://forum.arduino.cc/index.php/topic,148850.0.html

If your Exclamation Mark key is stuck you will need to get advice elsewhere.

Guess how many Threads here are from people who don't have problems ?

It would have been better use of your keyboard skills to have written a title that describes the problem.

Your question "How it's right ?" is not much more help. Perhaps you meant "How it's wrong ?"

Tell us what your code is supposed to do and what it actually does.

Help us to help you.

...R