kty 10 linear

hy everyone! I am trying to make a temperature sensor and linearise it,... I hope You uderstand what I mean... I am not yet familiar with the whole terminologie :( but I am working on it :) I want to make a temperature sensor with kty 10 and arduino, wich will give me a reading in celsius on a 8x2 LCD display. I want to do it, but I cant get the math.h library to work... it wont turn red when I try to include it, and I have no way of knowing if I put in the equation coretly... using sqr, and rt functions is crutial if I want a linear masuremant, right?

any help from you good people would much apriciated :)

vito (thats my name :))

THIS IS WHAT I HAVE SO FAR, BUT IT IS NOWHERE NEAR CLOSE TO MY GOAL…

#include <LiquidCrystal.h>

double vrednost = 0;
int backLight = 13; //pin 13 nadzor osvetlitve zaslona (control of display backlight)
LiquidCrystal lcd(10,11,12,13,14,15,16);
int analogPin=4;
int analogValue = 0;
float napetost = 0; //napetost = voltage

void setup()
{
Serial.begin(9600);
pinMode(backLight, OUTPUT);
digitalWrite(backLight,HIGH);
lcd.begin(2,16);
lcd.clear();

}

void loop()
{
napetost = analogValue * 1023 / 8 / 150; //napetost = VOLTAGE, and I need to put in the equation wich linearises the reading, but am not shure how to do it
Serial.print(napetost); //napetost = voltage
Serial.println(“C”);
lcd.clear();
lcd.setCursor(1,0);
lcd.print(napetost);
lcd.setCursor(1,1);
lcd.print(“stopinj C”); //STOPINJ = DEGREES CELSIUS

delay(100);

}

I am trying to make a temperature sensor and linearise it,.