Laufende Aktion im loop beenden

[Rintin]

Hier ist code für den INT0:

ATtiny85 Interrupt code

Ok, here is what I have. attachInterrupt is indeed doesn't seem to work, but interrupts on INT0 work. So in this sketch, the internal LED on digispark ATTiny85 I have will light when PB2 is high and turn off when PB2 is low. I used piece of conductor to connect, disconnect ground to PB2 #define LED_PIN 1 #define INTERRUPT_PIN 2 // INT0 -> PB2 volatile byte i = 0; void setup() { GIMSK |= (1 << INT0); // enable external interrupt MCUCR |= (1 << ISC00); // CHANGE mode pinMode(INTERRUPT_P…

Man müsste auch was mit PCINTn basteln können