"_ledonn_"was not declared in this scope

[5225bishen]

Hello. I am Bishen from Sri Lanka. Can someone help me with this? I am making a program about led patterns that can change patterns with a tv remote.

#define delay50 100
#include<IRremote.h>

IRrecv Bishen (11);
decode_results results;

int myled[] = {2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13};
int num_of_leds;

void setup() {
num_of_leds = sizeof(myled) / sizeof(int);
for (int i = 0; i < num_of_leds; i++) {
pinMode(myled[i], OUTPUT);
}
}

void loop()
{
if(Bishen.decode(&results))
{
Serial.println(results.value, DEC);
Bishen.resume();

}

delay(1000);
ledonn();
delay(2000);
ledoff();
delay(2000);
for (int i = 0; i < 5; i++) {pattern1();}
for (int i = 0; i < 5; i++) {pattern2();}
for (int i = 0; i < 5; i++) {pattern3();}
for (int i = 0; i < 5; i++) {pattern4();}
for (int i = 0; i < 25; i++){pattern5();}
for (int i = 0; i < 5; i++) {pattern6();}
for (int i = 0; i < 15; i++){pattern7();}
for (int i = 0; i < 15; i++){pattern8();}
for (int i = 0; i < 5; i++) {pattern9();}
for (int i = 0; i < 5; i++) {pattern10();}
for (int i = 0; i < 50; i++){pattern11();}
for (int i = 0; i < 50; i++){pattern12();}
ledoff();
delay(5000);
}

long val = results.value;
//TURN ON ALL LEDs
if (val == 16)
void ledonn() {
for (int i = 0; i < num_of_leds; i++) {
digitalWrite(myled[i], HIGH);
}
}

//TURN OFF ALL LEDs
if (val == 2064)
void ledoff() {
for (int i = 0; i < num_of_leds; i++) {
digitalWrite(myled[i], LOW);
}
}

//LEFT TO RIGHT
if (val == 3088)
void pattern1() {
for (int i = 0; i < num_of_leds; i++) {
digitalWrite(myled[i], HIGH);
delay(delay50);
digitalWrite(myled[i], LOW);
}
}

//RIGHT TO LEFT
if (val == 528)
void pattern2() {
for (int i = num_of_leds; i > 0; i--) {
digitalWrite(myled[i - 1], HIGH);
delay(delay50);
digitalWrite(myled[i - 1], LOW);
}
}

//LEFT TO RIGHT FILL
if (val == 1552)
void pattern3() {
for (int i = 0; i < num_of_leds; i++) {
digitalWrite(myled[i], HIGH);
delay(delay50);
}
for (int i = num_of_leds; i > 0; i--) {
digitalWrite(myled[i - 1], LOW);
delay(delay50);
}
}

//RIGHT TO LEFT FILL
if (val == 3600)
void pattern4() {
ledonn();
delay(delay50);
for (int i = 0; i < num_of_leds; i++) {
digitalWrite(myled[i], LOW);
delay(delay50);
}
for (int i = num_of_leds; i > 0; i--) {
digitalWrite(myled[i - 1], HIGH);
delay(delay50);
}
ledoff();
}

//ALTERNATE LEDs
if (val == 272)
void pattern5() {
for (int i = 0; i < num_of_leds; i = i + 2) {
digitalWrite(myled[i], HIGH);
digitalWrite(myled[i + 1], LOW);
}
delay(delay50);
for (int i = 0; i < num_of_leds; i = i + 2) {
digitalWrite(myled[i], LOW);
digitalWrite(myled[i + 1], HIGH);
}
delay(delay50);
}

//OSCILLATING LEDs
if (val == 4048)
void pattern6() { //osc
for (int i = 0; i < num_of_leds; i++) {
digitalWrite(myled[i], HIGH);
delay(delay50);
digitalWrite(myled[i], LOW);
}
delay(delay50);
for (int i = num_of_leds; i > 0; i--) {
digitalWrite(myled[i - 1], HIGH);
delay(delay50);
digitalWrite(myled[i - 1], LOW);
}
}

//INSIDE
if (val == 2320)
void pattern7() {
for (int i = 0; i < num_of_leds / 2; i++) {
digitalWrite(myled[i], HIGH);
digitalWrite(myled[num_of_leds - 1 - i], HIGH);
delay(delay50);
digitalWrite(myled[i], LOW);
digitalWrite(myled[num_of_leds - 1 - i], LOW);
}
}

//OUTSIDE
if (val == 3536)
void pattern8()
{
for (int i = (num_of_leds / 2) - 1; i >= 0 ; i--)
{
digitalWrite(myled[i], HIGH);
digitalWrite(myled[num_of_leds - 1 - i], HIGH);
delay(delay50);
digitalWrite(myled[i], LOW);
digitalWrite(myled[num_of_leds - 1 - i], LOW);
}
}

//LEFT TO RIGHT 3 LEDs
if (val == 752)
void pattern9() {
for (int i = 0; i < num_of_leds + 3; i++) {
if (i <= num_of_leds) {
digitalWrite(myled[i], HIGH);
}
if (i > 2) {
digitalWrite(myled[i - 3], LOW);
}
delay(delay50);
}
}

//OSCILLATING 3 LEDs
if (val == 720)
void pattern10() {
for (int i = 2; i < num_of_leds; i++) {
if (i == 2) {
digitalWrite(myled[0], HIGH);
digitalWrite(myled[1], HIGH);
}
digitalWrite(myled[i], HIGH);
digitalWrite(myled[i - 3], LOW);
delay(delay50);
}
for (int i = num_of_leds - 4; i > -1; i--) {
digitalWrite(myled[i], HIGH);
digitalWrite(myled[i + 3], LOW);
delay(delay50);
}
}

//RANDOM EFFECT 1
if (val == 2800)
void pattern11() {
int randomnum = random(0, num_of_leds + 1);
digitalWrite(myled[randomnum], HIGH);
delay(delay50);
digitalWrite(myled[randomnum], LOW);
delay(delay50);
}

//RANDOM EFFECT 2
if (val == 3280)
void pattern12() {
int randomonn = random(0, num_of_leds + 1);
int randomoff = random(0, num_of_leds + 1);
digitalWrite(myled[randomonn], HIGH);
digitalWrite(myled[randomoff], LOW);
delay(delay50);
}
}
}

[UKHeliBob]

Welcome to the forum

Please follow the advice given in the link below when posting code, in particular the section entitled 'Posting code and common code problems'

Use code tags (the </> icon above the compose window) to make it easier to read and copy for examination

How to get the best out of this forum

See also FAQ - Arduino Forum for general rules on forum behaviour and etiquette. Hello, Welcome to the Arduino Forum. This guide explains how to get the best out of this forum. Please read and follow the instructions below. Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is fru…

[UKHeliBob]

  ledoff();
  delay(5000);
}

long val = results.value;
//TURN ON ALL LEDs
if (val == 16)
  void ledonn()
{

The closing brace of loop() is in the wrong place. You can clearly see that if you Auto format the sketch in the IDE, as above. Note that the ledonn() function definition does not start on the left margin as it should

As a result you have code outside of a function

[5225bishen]

Thank you so much

[UKHeliBob]

If the sketch is now working please post it here and mark the topic as solved