ich habe gerade herausgefunden, dass es eine "verbose output" gibt:
Binäre Sketchgröße: 11.348 Bytes (von einem Maximum von 28.672 Bytes)
Forcing reset using 1200bps open/close on port COM6
PORTS {COM1, COM6, } / {COM1, COM6, } => {}
PORTS {COM1, COM6, } / {COM1, COM6, } => {}
PORTS {COM1, COM6, } / {COM1, COM6, } => {}
PORTS {COM1, COM6, } / {COM1, COM6, } => {}
PORTS {COM1, COM6, } / {COM1, COM6, } => {}
PORTS {COM1, COM6, } / {COM1, COM6, } => {}
PORTS {COM1, COM6, } / {COM1, } => {}
PORTS {COM1, } / {COM1, COM6, } => {COM6, }
Found Leonardo upload port: COM6
C:\Users\xxxxxx xxxxxx\Desktop\Arduino Leonardo\Software\arduino-1.0.2-windows\arduino-1.0.2\hardware/tools/avr/bin/avrdude -CC:\Users\xxxxxx xxxxxx\Desktop\Arduino Leonardo\Software\arduino-1.0.2-windows\arduino-1.0.2\hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega32u4 -cavr109 -P\.\COM6 -b57600 -D -Uflash:w:C:\Users\XXXXXX~1\AppData\Local\Temp\build3311597198084708295.tmp\midi_t2_disp.cpp.hex:i
avrdude: Version 5.11, compiled on Sep 2 2011 at 19:38:36
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "C:\Users\xxxxxx xxxxxx\Desktop\Arduino Leonardo\Software\arduino-1.0.2-windows\arduino-1.0.2\hardware/tools/avr/etc/avrdude.conf"
Using Port : \.\COM6
Using Programmer : avr109
Overriding Baud Rate : 57600
AVR Part : ATmega32U4
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
eeprom 65 10 8 0 no 1024 8 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
flash 65 6 128 0 yes 32768 128 256 4500 4500 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : butterfly
Description : Atmel AppNote AVR109 Boot Loader
Connecting to programmer: .avrdude: Send: . [1b]
avrdude: Send: S [53]
avrdude: Recv:
avrdude: Recv:
avrdude: Send: V [56]
avrdude: Recv:
avrdude: Send: v [76]
avrdude: Recv:
avrdude: Recv:
avrdude: Send: p [70]
avrdude: Recv:
Found programmer: Id = "öÿ("; type = |
Software Version = E. (hier kommt noch mehr, läßt sich aber nocht mit copy paste einfügen. Entspricht aber dem Output des ersten Beitrages)