# Leonardo - Unable to upload sketch (error message in post)

**URL:** <https://forum.arduino.cc/t/leonardo-unable-to-upload-sketch-error-message-in-post/677919>\
**Category:** IDE 1.x\
**Created:** [October 10, 2020, 7:07pm UTC](https://forum.arduino.cc/t/leonardo-unable-to-upload-sketch-error-message-in-post/677919 "2020-10-10T19:07:13Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![boere87](https://avatars.discourse-cdn.com/v4/letter/b/e79b87/32.png) [@boere87](https://forum.arduino.cc/u/boere87)\
**Post date:** [November 23, 2020, 9:28pm UTC](https://forum.arduino.cc/t/leonardo-unable-to-upload-sketch-error-message-in-post/677919/8 "2020-11-23T21:28:09Z")

</div>

Hello,

I've found the issue with my Arduino Micro (and Leonardo) perhaps you have the same issue.  
I found out that NZXT CAM software was the culprit who kept my com ports busy.

Once I closed NZXT CAM I could upload programs to my Micro and Leonardo.

---

_[View the full topic](https://forum.arduino.cc/t/leonardo-unable-to-upload-sketch-error-message-in-post/677919)._
