Logic Analyzer question:

[sterretje]

@heinzight

I think even the 2016 would not be sufficient for ESP32 signals as they run at up to 240 Mhz, so I'd need the 5016 which runs at 500 Mhz. if I'm understanding this correctly.

Internally that speed is 240 MHz; it is not said that the external clock source for the processor is 240MHz.

I'm not that much of a hardware person but I have some doubts that you can output a 240 MHz signal on an output pin of the ESP32 or read a 240 MHz input signal, even with low level programming.