Looking for an expert in modbus tcp communication and knock, cam and crank signal generation using a pico2 or a portenta

Community Jobs and Paid Consultancy
1

We have created a circuit to simulated knock signal waveforms. We require expert help in porting this to a GUI that will send instructions regarding waveform data over modbus to a pico 2 depending on what crank angle has been set in the GUI.

Require help with a cam, crank and knock signal generation setup with modbus
2

zwieblum's first question will be "what is the budget"

1 Like
3

... don't know what to say yet ...

Anyway .. What's the budget :slight_smile:

1 Like
4

What platform is the GUI to be implemented on? PC, Giga, Uno....

If the circuit is hardware, how is that ported into a GUI?

1 Like
5

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.