I have a tilt bicopter that has two servos, power schematics as the pic. One Arduino Nano, an AMS1117 3.3v regulator, two servos provided with 5V by a mini 360 regulator The Lora module runs on the 3.3V from Nano and AMS1117 3.3v regulator. [image] The 5V power line is unstable, causing the rea…

I detach interrupts from Lora DIO pins 1ms early. It solves the problem of servo pwm signal being chopped 500us occasionally. Power jitter still not subside after adding bypass capacitors.

LoRa Causes Unstable Power and Induces Servo Jitter

Other Hardware General Electronics

Ballscrewbob October 31, 2021, 1:33am 7

I foresee some signal issues in the near future

Topic		Replies	Views
Servo jittering General Electronics	10	5510	May 6, 2021
Interfacing with servo and rc-receiver Interfacing	7	2227	May 6, 2021
Servos vibrate when I stick a resistor on them? Interfacing	9	3403	May 6, 2021
Newb Servo woes... Interfacing	13	5133	May 6, 2021
Powering Continuous Rotation Servos Interfacing	48	15423	May 6, 2021

LoRa Causes Unstable Power and Induces Servo Jitter

Related topics