Making a SSC -32 compatible for Arduino

Other Hardware Robotics
1

Hi,
I'm now doing a hexapod with Arduino. Serial Servo Controllers are not available in my area. Is there any DIY available for the SSC-32 controllers?? I have an Arduino Mega with Atmega1280, so is there any Servo library available so that I can control multiple(in this case 18 servos) servo's speed and position??
Thank You

2

The below discussion has info on a varable servo speed library.

http://arduino.cc/forum/index.php/topic,61586.0.html

3

Thank You Sir, :slight_smile:

Is this library can be used perfectly for making a hexapod to control all its 6 legs simultaneously just like using a servo controller board??

4

s_premkumar999:
Thank You Sir, :slight_smile:

Is this library can be used perfectly for making a hexapod to control all its 6 legs simultaneously just like using a servo controller board??

I haven't used the variable speed servo library, but below is some test code for moving several servos.

//zoomkat 11-22-12 simple delimited ',' string parse 
//from serial port input (via serial monitor)
//and print result out serial port
//multi servos added 

String readString;
#include <Servo.h> 
Servo myservoa, myservob, myservoc, myservod;  // create servo object to control a servo 

void setup() {
  Serial.begin(9600);

  //myservoa.writeMicroseconds(1500); //set initial servo position if desired

  myservoa.attach(6);  //the pin for the servoa control
  myservob.attach(7);  //the pin for the servob control
  myservoc.attach(8);  //the pin for the servoc control
  myservod.attach(9);  //the pin for the servod control 
  Serial.println("multi-servo-delimit-test-dual-input-11-22-12"); // so I can keep track of what is loaded
}

void loop() {

  //expect single strings like 700a, or 1500c, or 2000d,
  //or like 30c, or 90a, or 180d,
  //or combined like 30c,180b,70a,120d,

  if (Serial.available())  {
    char c = Serial.read();  //gets one byte from serial buffer
    if (c == ',') {
      if (readString.length() >1) {
        Serial.println(readString); //prints string to serial port out

        int n = readString.toInt();  //convert readString into a number

        // auto select appropriate value, copied from someone elses code.
        if(n >= 500)
        {
          Serial.print("writing Microseconds: ");
          Serial.println(n);
          if(readString.indexOf('a') >0) myservoa.writeMicroseconds(n);
          if(readString.indexOf('b') >0) myservob.writeMicroseconds(n);
          if(readString.indexOf('c') >0) myservoc.writeMicroseconds(n);
          if(readString.indexOf('d') >0) myservod.writeMicroseconds(n);
        }
        else
        {   
          Serial.print("writing Angle: ");
          Serial.println(n);
          if(readString.indexOf('a') >0) myservoa.write(n);
          if(readString.indexOf('b') >0) myservob.write(n);
          if(readString.indexOf('c') >0) myservoc.write(n);
          if(readString.indexOf('d') >0) myservod.write(n);
        }
         readString=""; //clears variable for new input
      }
    }  
    else {     
      readString += c; //makes the string readString
    }
  }
}