Hi, I’m trying to make a DIY “Arduino” using AtMega32-16au.( https://ww1.microchip.com/downloads/en/DeviceDoc/doc2503.pdf ) I see it has 32 I/O pins, and I’m wondering bow does the Arduino boot loader recognize them. Any help is appreciated.

SOLVED IT! When I connected the oscillator to the oscilloscope, it wasn't oscillating and upon closer inspection of the board, I realized that I connected a capacitor between the ground and xtal1 pin. All I had to do was de-solder it and it worked!

Making DIY “Arduino”

Development Tools IDE 1.x

leo6002 September 29, 2021, 10:06pm 12

What capacity? And also, in the output it says oscillator off, could that be an issue?

Topic		Replies	Views
ATmega32 con Arduino 2009 Hardware	11	2377	May 7, 2021
Burn Bootloader -> w/ Arduino as ISP option Syntax & Programs	34	51812	May 6, 2021
Bootloader problems... take 2... 3rd Party Boards	44	10830	May 6, 2021
Re-burning bootloaders 3rd Party Boards	31	14366	May 6, 2021
Bootloader Italiano	14	4887	May 6, 2021

Making DIY “Arduino”

Related topics