Making DIY “Arduino”

in0 · September 30, 2021, 4:01pm

This is the correct protocol setting for the Arduino as ISP programmer:

MCUdude/MightyCore/blob/v2.1.3/avr/programmers.txt#L61


      
          
          usbasp_slow.name=USBasp slow (MightyCore)
          usbasp_slow.communication=usb
          usbasp_slow.protocol=usbasp
          usbasp_slow.program.protocol=usbasp
          usbasp_slow.program.tool=avrdude
          usbasp_slow.program.extra_params=-Pusb -B32
          
          arduinoasisp.name=Arduino as ISP (MightyCore)
          arduinoasisp.communication=serial
          arduinoasisp.protocol=stk500v1
          arduinoasisp.speed=19200
          arduinoasisp.program.protocol=stk500v1
          arduinoasisp.program.speed=19200
          arduinoasisp.program.tool=avrdude
          arduinoasisp.program.extra_params=-P{serial.port} -b{program.speed}
          
          atmel_ice.name=Atmel-ICE (AVR) (MightyCore)
          atmel_ice.communication=usb
          atmel_ice.protocol=atmelice_isp
          atmel_ice.program.protocol=atmelice_isp

Topic		Replies	Views
ATmega32 con Arduino 2009 Hardware	11	2377	May 7, 2021
Burn Bootloader -> w/ Arduino as ISP option Syntax & Programs	34	51812	May 6, 2021
Bootloader problems... take 2... 3rd Party Boards	44	10830	May 6, 2021
Re-burning bootloaders 3rd Party Boards	31	14366	May 6, 2021
Bootloader Italiano	14	4887	May 6, 2021

Making DIY “Arduino”

Related topics