Hi, I’m trying to make a DIY “Arduino” using AtMega32-16au.( https://ww1.microchip.com/downloads/en/DeviceDoc/doc2503.pdf ) I see it has 32 I/O pins, and I’m wondering bow does the Arduino boot loader recognize them. Any help is appreciated.

SOLVED IT! When I connected the oscillator to the oscilloscope, it wasn't oscillating and upon closer inspection of the board, I realized that I connected a capacitor between the ground and xtal1 pin. All I had to do was de-solder it and it worked!

Making DIY “Arduino”

Development Tools IDE 1.x

jremington September 26, 2021, 2:58pm 2

Which boot loader?

Topic		Replies	Views
ATmega32 con Arduino 2009 Hardware	11	2377	May 7, 2021
Burn Bootloader -> w/ Arduino as ISP option Syntax & Programs	34	51812	May 6, 2021
Bootloader problems... take 2... 3rd Party Boards	44	10830	May 6, 2021
Re-burning bootloaders 3rd Party Boards	31	14366	May 6, 2021
Bootloader Italiano	14	4887	May 6, 2021

Making DIY “Arduino”

Related topics