Mapping(Not Resolved)

Projects Programming
4

So I adjusted my loop to this:

int potPin = A0; // Potentiometer Pin
int led1 = 13; // Green
int led2 = 11; // Green
int led3 = 9; // Green
int led4 = 7; // Yellow
int led5 = 5; // Yellow
int led6 = 3; // Red
int potValue = 0; // variable from the sensor

void setup() {
  pinMode(led1, OUTPUT);
  pinMode(led2, OUTPUT);
  pinMode(led3, OUTPUT);
  pinMode(led4, OUTPUT);
  pinMode(led5, OUTPUT);
  pinMode(led6, OUTPUT);
  Serial.begin(9600);
}

void loop(){
  analogRead(potPin);
  potValue = map(potValue, 0, 1023, 0, 200);
  digitalWrite(led1, HIGH);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led2, HIGH);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led3, HIGH);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led4, HIGH);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led5, HIGH);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led6, HIGH);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led1, LOW);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led2, LOW);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led3, LOW);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led4, LOW);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led5, LOW);
  Serial.println(potValue);
  delay(potValue);
  digitalWrite(led6, LOW);
  Serial.println(potValue);
  delay(potValue);
}

Now my potValue is constantly reading as 0... :astonished: What did I do wrong?? Thank you for the help!