Hallo , mein Name ist Uwe bin 47 Jahre und Neu hier im Forum.
Ich Programmiere eigentlich nur SPS von Siemens. Arduino´s habe ich schon lange aber Nutze sie nur für kleinere dinge ( von Programmieren kann man da nicht sprechen).
Mein Problem sind Umlaute im Matrix display , die umlaute werden angezeigt ABER irgenwie schummelt sich da ein byte dazu siehe Bild. Das Problem sind die Trennstriche die dort erscheinen.
Ich würde mich freuen wenn es jemanden gibt der Mein Sketch optimieren könnte . Da Ich den Sketch nicht zu 100 % verstehe, da ich ihn nur geändert habe und nicht selber geschrieben habe .
gelesen wird von einer lokalen Adresse die UTF-8 codiert ist.
#include <MD_Parola.h>
#include <MD_MAX72xx.h>
#include <TimeLib.h>
#include <WiFiUdp.h>
#include <ESP8266WiFi.h>
#include <ESP8266HTTPClient.h>
#include <ArduinoJson.h>
#include <FS.h>
#include <WiFiManager.h>
#include <ArduinoOTA.h>
char refreshSeconds[10] = "60";
char scrollPause[10] = "5";
char url[255] = "192.168.1.68:8087/getPlainValue/system.adapter.simple-api.0.Matrix_Display";
char scrollSpeed[10] = "25";
textEffect_t scrollEffectIn = PA_SCROLL_LEFT;
textEffect_t scrollEffectOut = PA_SCROLL_UP;
textPosition_t scrollAlign = PA_CENTER;
String configFilename = "sysconf.json";
//fixe Display
#define MAX_DEVICES 12
#define CLK_PIN D7
#define DATA_PIN D6
#define CS_PIN D8
MD_Parola P = MD_Parola(DATA_PIN, CLK_PIN, CS_PIN, MAX_DEVICES);
//MD_Parola P = MD_Parola(CS_PIN, MAX_DEVICES);
uint8_t degC[] = {5, 6 , 15 , 9 , 15 , 6 };
uint8_t line[] = {4, 0, 8, 8, 8 };
uint8_t plus[] = {5, 8, 8, 62, 8, 8};
uint8_t block[] = {3, 255, 255, 255};
uint8_t heart[] = {5, 28, 62, 124, 62, 28};
uint8_t oe[] = {5, 56, 69, 68, 69, 56};
uint8_t OE[] = {5, 61, 66, 66, 66, 61};
uint8_t ue[] = {5, 60, 65, 64, 33,124};
uint8_t UE[] = {5, 60, 65, 64, 65, 60};
uint8_t ae[] = {5, 32, 85, 84,121, 64};
uint8_t AE[] = {5, 121, 20, 18, 20, 121};
char curMessage[512];
int loopCount = 0;
int cnt = 0;
long lastMillis = 0;
String valueArray[20];
int valueCount = 0;
int intensity = 0;
int modeCnt = 0;
byte timeSetTryCount = 0;
//WifiManager - don't touch
#define IPSIZE 16
bool shouldSaveConfig = false;
bool wifiManagerDebugOutput = false;
char ip[15] = "0.0.0.0";
char netmask[15] = "0.0.0.0";
char gw[15] = "0.0.0.0";
bool startWifiManager = false;
const int NTP_PACKET_SIZE = 48;
byte packetBuffer[ NTP_PACKET_SIZE];
unsigned int localNTPport = 2390;
const char* ntpServerName = "ptbtime2.ptb.de";
WiFiUDP NTPudp;
int localCNTRLport = 6610;
char incomingPacket[255];
WiFiUDP CNTRLudp;
#define key1 D1
#define key2 D2
bool key1last = false;
bool key2last = false;
void setup() {
Serial.begin(115200);
pinMode(key1, INPUT_PULLUP);
pinMode(key2, INPUT_PULLUP);
P.begin();
P.setIntensity(intensity);
P.displayClear();
P.displaySuspend(false);
P.addChar('
MatrixDisplayESP8266_uwe.ino (6.52 KB), degC);
P.addChar('-', line);
P.addChar('_', block);
P.addChar('?', heart);
P.addChar('ö', oe);
P.addChar('Ö', OE);
P.addChar('ü', ue);
P.addChar('Ü', UE);
P.addChar('ä', ae);
P.addChar('Ä', AE);
P.displayText("Starte...", PA_LEFT, 25, 10, PA_PRINT, PA_PRINT);
P.displayAnimate();
if (digitalRead(key1) == LOW || digitalRead(key2) == LOW) {
startWifiManager = true;
}
if (!SPIFFS.begin()) {
Serial.println("Failed to mount file system");
} else {
if (!loadSysConfig()) {
Serial.println("Failed to load config");
} else {
Serial.println("Config loaded");
}
}
//Nachdem die Config geladen wurde...
P.setIntensity(intensity);
if (doWifiConnect() == true) {
NTPudp.begin(localNTPport);
CNTRLudp.begin(localCNTRLport);
setSyncProvider(getNtpTime);
setSyncInterval(3600);
while (timeStatus() == timeNotSet) {
Serial.println("Waiting for Time set");
delay(1500);
timeSetTryCount++;
if (timeSetTryCount > 4) {
P.displayText("NTP FAILURE", PA_LEFT, 25, 10, PA_PRINT, PA_PRINT);
P.displayAnimate();
delay(2000);
ESP.restart();
}
}
P.displayText(curMessage, scrollAlign, String(scrollSpeed).toInt(), String(scrollPause).toInt() * 1000, scrollEffectIn, scrollEffectOut);
startOTAhandling();
}
else ESP.restart();
}
void loop() {
ArduinoOTA.handle();
if (digitalRead(key1) == LOW ) {
if (!key1last) {
key1last = true;
intensity = intensity + 2;
if (intensity > 14) intensity = 0;
P.setIntensity(intensity);
Serial.println("Set intensity to " + String(intensity));
if (!saveSysConfig()) {
Serial.println("Failed to save config");
} else {
Serial.println("Config saved");
}
delay(50);
}
} else {
key1last = false;
}
if (digitalRead(key2) == LOW ) {
if (!key2last) {
key2last = true;
modeCnt++;
if (modeCnt > valueCount + 1) modeCnt = 0;
Serial.println("Mode: " + String(modeCnt));
delay(50);
}
} else {
key2last = false;
}
String udpMessage = handleUDP();
if (((millis() - lastMillis > String(refreshSeconds).toInt() * 1000) || lastMillis == 0 || udpMessage == "update") && String(url) != "") {
Serial.println("Fetching data from URL...");
String valueString = loadDataFromURL();
char buf[valueString.length() + 1];
valueString.toCharArray(buf, sizeof(buf));
char *p = buf;
char *str;
valueCount = 0;
while ((str = strtok_r(p, ";", &p)) != NULL) {
valueArray[valueCount] = str;
valueCount++;
}
lastMillis = millis();
}
if (modeCnt == 0) {
if (P.displayAnimate())
{
loopCount++;
if (loopCount > valueCount || valueCount == 0) {
String Zeit = calcTime(now());
Zeit.toCharArray(curMessage, 10);
loopCount = -1;
} else {
String currentValue = valueArray[loopCount];
currentValue.toCharArray(curMessage, currentValue.length() + 1);
}
P.displayReset();
P.displayText(curMessage, scrollAlign, String(scrollSpeed).toInt(), String(scrollPause).toInt() * 1000, scrollEffectIn, scrollEffectOut);
}
} else {
if (valueCount > 0) {
String currentValue = valueArray[modeCnt - 1];
currentValue.toCharArray(curMessage, currentValue.length() + 1);
}
if (modeCnt > valueCount) {
String Zeit = calcTime(now());
Zeit.toCharArray(curMessage, 10);
}
P.displayText(curMessage, PA_CENTER, String(scrollSpeed).toInt(), 10, PA_PRINT, PA_PRINT);
P.displayAnimate();
}
}
String loadDataFromURL() {
if (WiFi.status() == WL_CONNECTED) {
HTTPClient http;
http.setTimeout(3000);
Serial.println("getState url: " + String(url));
http.begin(url);
int httpCode = http.GET();
String payload = "error";
if (httpCode > 0) {
payload = http.getString();
}
if (httpCode != 200) {
Serial.println("HTTP " + String(url) + " fail");
payload = " HTTP ERROR ";
}
http.end();
if (payload.indexOf("") > 0) {
payload = payload.substring(payload.indexOf(""));
payload = payload.substring(5, payload.indexOf(""));
} else {
payload = payload.substring(1, payload.length() - 1);
}
Serial.println("getState payload = " + payload);
return payload;
} else ESP.restart();
}
[MatrixDisplayESP8266_uwe.ino|attachment](upload://ia1lxhixrlDDb6BtqOW6JnJK3O9.ino) (6.52 KB)
würde es nicht ausreichen den "strich" rauszunehmen ? Ich brauche ja nur die umlaute .