Please explain the problems again. But this time use the names of the tpic chip pins, not the pin numbers. Nobody memorises pin numbers because life is too short. Also explain what you mean by "the signal is one pin ahead" and "if i try to power pin 7 from chip 12, it will power it AND pin 0 from chip 13". You should power the chip through the pin called Vcc and no other pin.
You did not answer my questions about bypass caps, or swapping chips.
A schematic would be very helpful. You don't need to show every tpic chip, just show chips 1, 2, 11, 12, 27, 28, 36 and the buffer chips.