i have connected my maxon motor m120675 036 model to M0 of odesc3.6 dual drive and the hall sensor wires are connected to pin A, B ,Z, 5V and Gnd of odesc3.6 dual drive. and odesc3.6 dual drive is connected to ardunio uno using a usb cable. ardunio pin 8, 9 are connected to driver gpio pin 1 and 2. now provide me the ardunio code to run this motor. motor has Number of pole pairs= 7, and Number of phases= 3
as i attach my motor to dual driver odesc3.6 the motor runs and complete 1 turn . but i want to control the speed, position of motor so help me how i can iterface the motor with ardunio uno to control the position and speed
Hi, @adbled
Welcome to the forum.
Can you please post a copy of your circuit, a picture of a hand drawn circuit in jpg, png?
Hand drawn and photographed is perfectly acceptable.
Please include ALL hardware, power supplies, component names and pin labels.
Can you please post links to spes/data of your motor and the drive?
Can you please post your code?
Thanks.. Tom.. 
bascially i have 1 maxon ec motor its 3 wires red, black and white are connected to odesc3.6 dual drive M0 portion and the hall sensors wires are also connected to a,b,z pins of drive.then i have connected ardunio uno pin 8, 9 to driver GPIO pins 1 & 2. and driver is atached to power supply of 24v as operating range of driver is from 8V to 56V
all connectation is just like given in the pic i have just used 1 motor instead of 2
Ive moved your topic to a more suitable location on the forum as I can't see how this relates to Interfacing w/ Software on the Computer.
So can you just tell me how I can operate the maxon ec motor with Odesc3.6 dual drive as the pic of drive is given above
Sorry, no idea.
Link to specs please?
Can you please tell us your electronics, programming, arduino, hardware experience?
What is your project?
Thanks.. Tom..
This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.