# Measure pulse with 2 hands

**URL:** <https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875>\
**Category:** General Guidance\
**Created:** [March 15, 2024, 10:39am UTC](https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875 "2024-03-15T10:39:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![yb14](https://avatars.discourse-cdn.com/v4/letter/y/76d3ee/32.png) [@yb14](https://forum.arduino.cc/u/yb14)\
**Post date:** [March 15, 2024, 10:39am UTC](https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875/1 "2024-03-15T10:39:05Z")

</div>

Hello everyone,

I am currently working on a project that involves monitoring heart rate, and I'm exploring the possibility of using a heart rate sensor commonly found in gym treadmills.

Specifically, I'm interested in knowing if the heart rate sensor used in gym treadmills is compatible with Arduino. My goal is to integrate this sensor into my Arduino project for heart rate monitoring.

If anyone has experience or information regarding the compatibility of this sensor with Arduino or has successfully used it in a similar project, I would greatly appreciate any insights or advice you could provide.

Thank you in advance for your assistance!

Best regards,  
 ![Image1](https://europe1.discourse-cdn.com/arduino/original/4X/6/5/a/65a0f1609d1a82cec921600b0f479ed957171ab4.jpeg)

---

<div class="post-metadata">

**Author:** ![Railroader](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/railroader/32/274550_2.png) [@Railroader](https://forum.arduino.cc/u/Railroader)\
**Post date:** [March 15, 2024, 10:53am UTC](https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875/2 "2024-03-15T10:53:26Z")

</div>

A link to the sensor datasheet would help us a lot.

---

<div class="post-metadata">

**Author:** ![docdoc](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/docdoc/32/220907_2.png) [@docdoc](https://forum.arduino.cc/u/docdoc)\
**Post date:** [March 15, 2024, 11:38am UTC](https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875/3 "2024-03-15T11:38:23Z")

</div>

See this to start:

> **[GitHub - votrinhan88/hand-grip-heart-rate-monitor: Processing of analog...](https://github.com/votrinhan88/hand-grip-heart-rate-monitor)**
>
> Processing of analog signal of Vernier hand grip sensor to heart rate - votrinhan88/hand-grip-heart-rate-monitor

---

<div class="post-metadata">

**Author:** ![bluejets](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bluejets/32/1013044_2.png) [@bluejets](https://forum.arduino.cc/u/bluejets)\
**Post date:** [March 15, 2024, 1:23pm UTC](https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875/4 "2024-03-15T13:23:40Z")

</div>

So, did you do the online tutorial like github suggested?

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [September 11, 2024, 1:24pm UTC](https://forum.arduino.cc/t/measure-pulse-with-2-hands/1235875/5 "2024-09-11T13:24:26Z")

</div>

Closed on September 11, 2024, 1:24pm UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.