I am new to this. This 2012 Version Arduino UNO R3 board is amazing. (Atmega 16U2 chip) I am running on Windows 7 and I have a project that I am working on. I have 4 hc-sr04 sensors that are pointed in all 4 directions. I have 0.56" 7 segment 4 digit common anode red LED digital displays for each m…

AFAIK there is no ready made code for you, NewPing might help, but first try to get one sensor to work correctly. Do you already tried that?

I have not because I am waiting for my LED displays to get here. Do you know where to find a sample project that I can learn from. I still don't know the code that great.

If you are new to Arduino, the best thing to do is going through the examples that come with the IDE. There will be lots of code that you will recognize as useful.

1 Question.... Does this sound possible with 4 sensors and 4 LED readouts? If so, I will build it and share. I just don't want to waste my time with it if any of you "professionals" know. lol I will move on to other projects. Any answers will be amazing. :slight_smile:

The sensors will interfere with each other, so measurements have to be sequential. How rapidly you can do that depends on the distance to the measurement target, because sound travels rather slowly. Given all the examples on the web, it should be straightforward to get one sensor and one display wo…

thefourguy4444: I have 0.56" 7 segment 4 digit common anode red LED digital displays for each measurement readout in inches. It's harder than you think to get those displays working, especially if you have so many of them.

Nonsense, just takes 4 PNP transistors and a little multiplexing with blink without delay style coding. Drive the cathodes from 7 outputs, or a shift register like TPIC6C595. Enable 1 anode at a time for a few mS. Turn off the anode. Repeat for the next digit. Got lots of digits? Use mic2981 in…

Thanks CrossRoads. (very impressive!) I would love to succeed with this project. Unfortunately I am such a beginner with this. How about writing the code for me. lol. lol. lol. I think I need to learn a lot more so I can make this happen. Can you (or anyone else) suggest a few sample projects t…

Great I will try to find it.If you remember or find out where it is could you drop me a message so I can get it. I would love to have it to use for this.

Measuring with four(4) hc-sr04 sensors simultaneously.

Projects General Guidance

CrossRoads August 20, 2015, 5:01pm 10

The code has been written and posted here before, just need to find it.

Topic		Replies	Views
Carte test à 3 chiffres pour HC-SR04 par port série (RX, TX) Français	1	34	April 10, 2026
Problema con sensor hc-sr04 Español	2	51	March 21, 2026
Display 4 distances from 4 HC-SR04s from 1 board General Guidance	3	1105	April 7, 2013
Two HC-SR04, two leds General Guidance	18	1926	November 17, 2021
Hello, I need help with this, if anyone knows the code and how to do it on the breadboard I would be grateful General Guidance	3	206	February 26, 2024

Measuring with four(4) hc-sr04 sensors simultaneously.

Related topics