Mega with enc28j60 module

pert · May 4, 2018, 9:57pm

CS pin is configured in Enc28j60Network.h:

ntruchsess/arduino_uip/blob/Arduino_1.5.x/UIPEthernet/src/utility/Enc28J60Network.h#L30


      
          
          
You should have received a copy of the GNU General Public License
          along with this program.  If not, see <http://www.gnu.org/licenses/>.
          */
          
          
#ifndef Enc28J60Network_H_
          #define Enc28J60Network_H_
          
          
#include "mempool.h"
          
          
#define ENC28J60_CONTROL_CS     SS // this is pin 10 on Uno and pin 53 on Mega256
          
          
#if defined(ARDUINO_ARCH_AVR)
          // AVR-specific code
          #define SPI_MOSI        MOSI
          #define SPI_MISO        MISO
          #define SPI_SCK         SCK
          #define SPI_SS          SS
          #define ENC28J60_USE_SPILIB 0
          #elif defined(ARDUINO_ARCH_SAM)
          #define ENC28J60_USE_SPILIB 1

#define ENC28J60_CONTROL_CS     SS // this is pin 10 on Uno and pin 53 on Mega256

Topic		Replies	Views
ENC28J60 + Mega2650 - Resolved Networking, Protocols, and Devices	10	5181	May 6, 2021
Problema con MEGA 2560 y un enc28j60 Español	3	2957	May 6, 2021
Using the ENC28J60 with an Arduino Mega 2560 Networking, Protocols, and Devices	6	14597	May 6, 2021
Pinbelegung ändern und herrausfinden Deutsch	10	5346	May 6, 2021
MEGA + enc28j60 ... so nearly there Troubleshooting	2	4526	May 6, 2021

Mega with enc28j60 module

Related topics