Thanks for the reply!
Its the basic webserver code, what i found in the arduino 1.0.1
I only changed the IP address for my network.
Which means that reading them is silly. So, don't do that. Or, don't form ANY expectations about what the values should be.
I know that. It must read silly values out, but there are only 1023 values on every single AD pin.
I put GND 3.3V, 5V into theese pins, but still 1023
How i told, i tested it, with theese voltages, and still 1023 in the web browser.
Today i tried a new code, with theese pins. They are work fine as digital I/O, without any ethernet shield, or other stuff.
Thanks for all who try to help me! By the way, sorry for my bad english.