micro timing

Projects Programming
1

Please leave your comments. Thank you

const unsigned long Nan = 1000; // 1 micro second
const unsigned long Mic = 1000; // 1 milli second
const unsigned long Mil = 1000; // 1 second
const unsigned long Sec = 60;   // 1 minute
const unsigned long Min = 60;   // 1 hour
const unsigned long Hrs = 12;

int Na = 0; // Store Nano Seconds
int Mi = 0; // Store Micro seconds
int Ml = 0; // Store Milli seconds
int Sc = 0; // Store Seconds
int Mn = 0; // Store Minutes
int Hr = 0; // Store Hours

boolean Nanos = false;
boolean Micro = false;
boolean Mills = false;
boolean detik = false;
boolean minut = false;
boolean hours = false;

const unsigned long Nanosecond  = 1000000;
const unsigned long Microsecond = 1000;
const unsigned long millisecond = 1000;
const unsigned long Second      = 60;
const unsigned long Minute      = 1;
const unsigned long Hour        = 1;

unsigned long prev_nano = 0;
unsigned long prev_micro = 0;
unsigned long prev_milli = 0;
unsigned long prev_second = 0;
unsigned long prev_minute = 0;
unsigned long prev_hour = 0;
unsigned long currentMillis = 0;
unsigned long currentMicro = 0;

void setup() {

  currentMicro = micros();
  currentMillis = millis();
}
void loop() {

  calculate_Nanosecond();
  calculate_Microsecond();
  calculate_Millisecond();
  calculate_Second();
  calculate_Minute();
  calculate_Hour();
  Get_Current_Time();
}
/*Use oscilloscope to check functions.
calculate_Nanosecond
calculate_Microsecond
calculate_Millisecond
*/

void calculate_Nanosecond() {
}

void calculate_Microsecond() {
}

void calculate_Millisecond() {
}

void calculate_Second() {
}

void calculate_Minute() {
}

void calculate_Hour() {
}
void Get_Current_Time() {
}
2 
// what do you want?
/* and why? */
3

AWOL,

you are straight to it. I am attempting to run a program which logs a time period and serial prints the nearest Nano, micro, millisecond, second, minute, hour in which it occurs. I don't have a stop time at the moment. I am looking for guidance to develop more.

4

https://www.arduino.cc/en/Reference/Micros

On 16 MHz Arduino boards (e.g. Duemilanove and Nano), this function has a resolution of four microseconds (i.e. the value returned is always a multiple of four).

You can make shorter intervals with lines of NOP commands but not log at the same time.