Mini Stick- a new Ardweeny style module

Community Products and Services
1

I recently finished 3 PCB's for sharing at OSHpark.

  1. Mini Stick - An Ardweeny DIP module inspired by CrossRoad's discussion with LarryD and WestFw's suggestion in the discussion.
    1284P top mount card - Microcontrollers - Arduino Forum

  2. Radio Nano - A Nano style DIP module with nRF24L01+ interface.

  3. In-between shield - Inspired by the go-between shield, https://www.sparkfun.com/products/11002 ,
    this in-between swaps UNO I/O pins without soldering.

These are all through hole boards for DIY makers. If anyone is interested in making them or selling them in kits, you can order low cost PCBs from OSHpark OSH Park ~ Shared Projects by Firebirduino, or Iteadstudio http://imall.iteadstudio.com/open-pcb/pcb-prototyping.html depending the PCB size.

2

No schematics?

3

Schematics are here:

bottom of page

4

Hi All,
Since I made an Arduweeny style module two months ago, some users pointed out to me that the Samtec socket strip is very expensive and out of stock, so it's impossible for them to make the module.
I changed the socket strip type. The new Mini Stick V2 bare PCB is available for sharing at Oshpark:
https://oshpark.com/shared_projects/AwknwnXD
The schematic basically is not changed from the V1.