Hi, I'm designing a board (A) that will communicate with another unknown micro (B). A runs on 3.3v, and I have managed to get hold of components that work with 3.3v. However B needs a wiper input between 0 and 5v, so I thought I'd use a digital pot. I've found one (DS1803-10) that may work. However…

mixing 3.3v, 5v and i2c

Grumpy_Mike November 30, 2009, 11:13pm 5

Yes with points A_4 and A_5 going to the 3V3 processor signals

Topic		Replies	Views
I2C zwischen 5V Master und 3.3V Slave Deutsch	12	14496	May 6, 2021
Logic Level Converter 3> 5 > 3 General Electronics	3	1849	May 6, 2021
Super Simple Bidirectional 5Volt & 3.3Volt Logic Level Converter Needed General Guidance	13	9758	May 5, 2021
Duda I2C Español	17	6394	May 6, 2021
3.3v to 5v I2C interface Networking, Protocols, and Devices	4	829	May 6, 2021