# MKR Vidor 4000 Pinmapping

**URL:** <https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674>\
**Category:** MKR Vidor 4000\
**Created:** [February 22, 2019, 7:35pm UTC](https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674 "2019-02-22T19:35:35Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tempest15](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tempest15/32/326998_2.png) [@Tempest15](https://forum.arduino.cc/u/Tempest15)\
**Post date:** [February 22, 2019, 7:35pm UTC](https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674/1 "2019-02-22T19:35:35Z")

</div>

I took the time and made a list on how the fpga connects to the arduino, the hdmi connector, the PCI and the MIPI Camera pins.

In the quartus prime software you can enter the pin numbers in the Pin Planner that generates the contrains.

I hope it will help you. I have seen many that have requested for an detailed pin plan.

[Arduino MKR Vidor 4000 Pinmapping.pdf](https://forum.arduino.cc/uploads/short-url/b88wMaVCWgashJKkull5Vt9el4e.pdf) (101 KB)

---

<div class="post-metadata">

**Author:** ![pert](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/pert/32/217111_2.png) [@pert](https://forum.arduino.cc/u/pert)\
**Post date:** [February 23, 2019, 12:11am UTC](https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674/2 "2019-02-23T00:11:55Z")

</div>

Thanks for sharing Tempest15! I'm sure this will be much appreciated.

---

<div class="post-metadata">

**Author:** ![Limba](https://avatars.discourse-cdn.com/v4/letter/l/90ced4/32.png) [@Limba](https://forum.arduino.cc/u/Limba)\
**Post date:** [February 23, 2019, 2:36pm UTC](https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674/3 "2019-02-23T14:36:59Z")

</div>

\constraints\MKRVIDOR4000 contains vidor\_s\_pins.qsf  
That have all fpga pins

Put this line in yut project qsf file  
source ../../../constraints/MKRVIDOR4000/vidor\_s\_pins.qsf

Edit:  
That file also contains needed IO type settings. like 2.5V or 3.3v etc. Also it have SDRAM and FLASH pins.

---

<div class="post-metadata">

**Author:** ![jwestmoreland](https://avatars.discourse-cdn.com/v4/letter/j/d6d6ee/32.png) [@jwestmoreland](https://forum.arduino.cc/u/jwestmoreland)\
**Post date:** [March 16, 2019, 6:19am UTC](https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674/4 "2019-03-16T06:19:06Z")

</div>

Thanks Tempest - but I'm going to post a question.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [May 7, 2021, 11:54am UTC](https://forum.arduino.cc/t/mkr-vidor-4000-pinmapping/575674/5 "2021-05-07T11:54:57Z")

</div>

Closed on May 7, 2021, 11:54am UTC